CEESC Extra Large Cat Door (Outer Size 11″ x 9.8″), 4 Way Locking Large Cat Door for Interior Exterior Doors, Weatherproof Pet Door for Cats & Doggie with Circumference < 24.8" (White)

Product Description

Further Massive Cat Door Specs

Be aware:

Outer Measurement: 9.8″ x 11″ x 2.15″(W x H x D);Interior dimension: 7.9″ x 8.7″(W x H);Minimize-Out Measurement: 8.3″ x 9.5″ (W x H);Match Cats as much as 25.54 lbs （The waistline lower than 24.8″ );Materials: ABS plasticColor: WhiteStyle: FlapWeight: 1.19 lb

Make it possible for the width and peak(shoulder degree) of the pet are inferior to the pet display screen door, thanks.The depth of door/wall/window you will set up to had higher greater than the depth 2.17″, in order to screw in 8 screws from each side simply.

Bundle Contains of CEESC Further Massive Cat Door :

1 X Massive Cat flap door

8 X Screws

8 X Screw caps

1 X Set up directions

If the cat door is just too thick for the door, please use scissors or slicing machine to chop alongside the road within the width of the body.

Installion directions

1. Draw define on the paper board

Draw the cat door body on a paper board and minimize it down.

Be aware:

You had higher put together these mandatory instruments first, pencil, ruller, electrical noticed, drill, screwdriver, double-side tape.

2. Draw define on the door

Use a pencil draw across the fringe of the minimize paper on the door you wish to be mounted to.

Be aware:

Typically, common set up peak is round 10-15 cm from the ground.

3. Drill 4 corners for holes

Drill 4 corners for thorough holes first with an electrical drill.

4. Minimize out a tunnel gap

Minimize out the tunnel gap with an electrical noticed beginning at holes drilled.

5. Put the cat door within the door

After the tunnel gap is minimize out, it is higher to wrap round it with a layer of wooden pores and skin. And in case your gap is slicing somewhat huge, it is fairly neccessary.

6. Minimize down tunnel depth if mandatory

If the cat door is just too thick on your door, use a scissors or slicing machine to chop down some a part of tunnel alongside the road A or B. The slicing scale is about 2-4CM.

7. Mount to the door

Mount the cat door with double-side tape to the door. 8 screws have been supplied on your use, tighten them with a screwdriver on each side.

Be aware:

8 screws for 4 holes on each side, screw all of them in 2 sides as illustration proven above, please. These 8 screws are designed to work collectively, they don’t seem to be quick.

8. Achieved

Place screw caps over the screw holes, press them on. The set up is totally executed.

☞4 WAY SWITCH MODE — The pet door might be adjusted by the Pink and Inexperienced switches with tabs to 4 modes: out solely, in solely, each out and in, and totally locked, simple management of your pet’s out and in.
☞SIZE & APPLICATION — Outer Measurement: 9.8″ x 11″ x 2.15″(W x H x D), Interior dimension: 7.9″ x 8.7″(W x H), Minimize-Out Measurement: 8.3″ x 9.5″ (W x H), appropriate for set up on doorways and skinny partitions, appropriate for cat and doggie lighter than 27.54 lb and waist circumference shorter than 24.8″
☞SAFE & THOUGHTFUL — The clear flap let pet see via the door. Exterior rain seal is for waterproof. Brush strip eliminates noise from the door closing.
☞EASY TO INSTALL — Full directions included, make you simply set up in home windows, doorways, cabinets, panels and partitions and many others.
☞EXCELLENT QUALITY — Manufactured from ABS materials, weather-resistant, the floor is easy and sturdy.